Maximisation of Buckling Resistance in Structural Members Made of Circular Hollow Sections

Ryszard Walentyński; Monika Siwek

doi:10.24423/cames.283

Ryszard Walentyński Silesian University of Technology, Gliwice, Poland
Monika Siwek Silesian University of Technology, Gliwice, Poland

DOI: http://dx.doi.org/10.24423/cames.283

Abstract

This paper deals with the optimisation of the joint for thin-walled compressed elements that have circular hollow sections (CHS). A steel pipe is studied that has 3 m length, 52.3 mm diameter and 3 mm thick wall. Few examples of joint shapes are proposed. The first of them uses two extra plates that are perpendicular to the circular section. They are both in the shape of an isosceles triangle with 100 mm long and 3 mm thick sides. The second option uses four of those triangle plates. The next step is to provide perforation only in the joint area as well as along the whole element. The last option is to use a short smaller pipe inside the base pipe. Results have been compared to each other and conclusions are summarised.

Keywords

Thin-walled pipe, steel pipe, CHS joints,

References

1. Russian code sp 16.13330.2011 steel structures.
2. J.S. Arora, Introduction to optimum design, 2nd ed., Elsevier, 2004.
3. J. Bródka, M. Lubinski, Lightweight steel constructions [in Polish: Lekkie konstrukcje stalowe], Arkady, 1978.
4. Z.S. Brzoska, Statics and stability of rod and thin-walled structures [in Polish: Statyka i statecznosc konstrukcji pretowych i cienkosciennych], Panstwowe Wydawnictwo Naukowe, 1961.
5. A. Gajewski, M. Zyczkowski, Optimal structural design under stability constraints, vol. 13, Springer Science & Business Media, 2012.
6. A. Kopczynski, E. Rusinski, Passive safety, energy absorption by thin-walled profiles [in Polish: Bezpieczenstwo bierne, pochłanianie energii przez profile cienkoscienne], Oficyna Wydawnicza Politechniki Wrocławskiej, 2010.
7. E. Kubica, Ultimate load capacity and longitudinal stiffness of thin-walled steel elements [in Polish: Nosnosc graniczna i sztywnosc podłuzna cienkosciennych elementów stalowych], Oficyna Wydawnicza Politechniki Wrocławskiej, 2005.
8. Z. Olesiak, On the Huber-Mises plasticity condition [in Polish: O warunku plastycznosci Hubera-Misesa], Journal of Theoretical and Applied Mechanics, 13(4): 523–528, 1975.
9. S. Panda, M. Barik, Flexural stability analysis of stiffened plates using the finite element method, Computer Assisted Methods in Engineering and Science, 24(3): 181–198, 2018.
10. W.Y. Peen, Ch.K. Keong, O. Hassanshahi, Behaviour of hollow circular section with multiple perforations under compression, flexure and torsion, Latin American Journal of Solids and Structures, 16(2), e169, 2019.
11. S.P. Timoshenko, J.M. Gere, Theory of elastic stability, Courier Corporation, 2009.